A8gent
A8gent
·
Comparison

PolyAI vs Vapi: A Sales Call or $0.05 a Minute

PolyAI publishes no rate and no trial. Vapi publishes $0.05 a minute and lets you build today. The comparison is really about which buyer you are.

PolyAI vs Vapi: A Sales Call or $0.05 a Minute visual
AI Agent Starter Kit cover

Free download

AI Agent Starter Kit

Workflow picker, ROI worksheet, 40-prompt pack, and the first-agent rollout playbook. The 1-hour version of the entire A8gent system.

Workflow picker
ROI worksheet
Prompt checklist
Team rollout plan
Open it now

No spam. Worksheet + prompt checklist + rollout plan delivered instantly.

Contents
  1. Fast answer
  2. Quick facts
  3. What this covers
  4. Why it matters
  5. Where to go next
  6. Outcomes
  7. Step by step
  8. Pick PolyAI when, pick Vapi when
  9. A quote against a rate card, and the four questions
  10. Where both of these are the wrong answer
  11. How to check this yourself, and what we did not test
  12. At a glance
  13. Mistakes to avoid
  14. FAQ
TL;DRAnswer-first

Fast answer

These are not really competing for the same buyer, and the pricing pages say so. PolyAI publishes no rate at all: the only billing statement on its pricing page is that ongoing use of the voice agent is priced per minute and that the charge includes proactive performance improvements, maintenance and 24/7 support. No minimum commitment, implementation fee, trial length or self-serve signup is published, and every route leads to a demo request. Vapi publishes $0.05 a minute for orchestration with the model, speech-to-text and speech synthesis billed by your own providers at cost or at nothing to Vapi with your own keys, $0.005 per SMS or chat message, 10 concurrent lines included on the Build plan with extras at $10 per line a month, and compliance add-ons at $2,000 a month for HIPAA and $1,000 a month for Zero Data Retention. One is bought through procurement; the other is bought with a card this afternoon.

Facts last verified 2026-08

Quick facts

PolyAI published rate
Not published (checked 2026-08-20)
PolyAI billing model
Per minute, including improvements, maintenance and 24/7 support
PolyAI minimum
Not published
PolyAI trial
Not published; no self-serve signup
Vapi rate
$0.05/min orchestration, $0.005 per SMS or chat message
Vapi concurrency
10 lines on Build, extras $10 per line per month
Vapi compliance
HIPAA $2,000/mo, Zero Data Retention $1,000/mo

On this page

What this page covers

A comparison visitor should understand the tradeoff, the best-fit scenario, and the next diagnostic tool to confirm the choice.

  1. 01Quick verdict
  2. 02Pricing
  3. 03Purchase shape
  4. 04Who builds it
  5. 05Decision table
  6. 06Where both are wrong

Why does this matter now?

A comparison between a quote and a price list is really a comparison between two purchase processes. PolyAI sells a scoped, built and supported deployment to organisations that expect that. Vapi sells components to a developer. Knowing which of those you are saves weeks, and weeks are the actual currency here: while an evaluation runs, the calls are still going unanswered.

Internal path

Where to go next from this page

These links are part of the A8gent learning and conversion path. Use them to move from concept, to diagnosis, to workflow build, to course.

Start with readiness

What you should be able to do after this

  • See what each vendor publishes
  • Understand two different purchase shapes
  • Benchmark an enterprise quote properly
  • Decide before spending weeks in evaluation

How do you do it, step by step?

1. Note what PolyAI does publish

Usage is priced per minute, and that charge includes proactive performance improvements, maintenance and 24/7 support. That is genuinely informative: it tells you the model is usage-based rather than per-seat, and that ongoing optimisation is bundled rather than billed as professional services. It just does not tell you the number.

2. Ask PolyAI for four numbers separately

The per-minute rate, the minimum commitment in both spend and term, the implementation or build fee as its own line, and the renewal mechanics. Ask for each in writing. The minimum commitment usually surfaces last and is the one most likely to make the deal non-viable for a smaller organisation.

3. Price Vapi completely before comparing

Vapi's $0.05 a minute is orchestration only. Add the language model, transcription, speech synthesis and telephony from your own providers. At 1,500 minutes a month that is $75 to Vapi plus your providers. Compliance is priced openly at $2,000 a month for HIPAA and $1,000 for Zero Data Retention, which is unusual and useful.

4. Ask who is building and supporting it

Vapi requires a developer, and that person also owns debugging a latency problem across four providers at nine on a Monday morning. PolyAI's per-minute charge explicitly includes maintenance and 24/7 support. That is a real difference in what you are buying, and for an organisation without engineering it may be the entire difference.

Pick PolyAI when, pick Vapi when

Pick Vapi when you need a number today and have someone who writes code. It publishes $0.05 a minute for orchestration with the model, speech-to-text and speech synthesis billed by your own providers at cost, or at nothing to Vapi if you bring your own keys, plus $0.005 per SMS or chat message. Ten concurrent lines are included on the Build plan with extras at $10 per line a month, and it is pay-as-you-go so you can test today.

Pick Vapi also when compliance has to be priced rather than scoped. It publishes HIPAA at $2,000 a month and Zero Data Retention at $1,000 a month on either plan. That is a negotiation you can budget for in advance rather than one you enter blind, and for a regulated business needing a number before committing, published compliance pricing is unusual and genuinely useful.

Pick PolyAI when you run a large contact centre, have a procurement function, and want a vendor that scopes and builds the deployment rather than handing you components. Its pricing page states that ongoing use of the voice agent is priced per minute and that the charge includes proactive performance improvements, maintenance and 24/7 support. That last part is the product: someone else owns the tuning and the on-call.

Pick PolyAI also when you have no engineering capacity and the calls matter. On Vapi, a latency problem at nine on a Monday morning means working out which of four providers is slow, and that person has to exist and be available. An enterprise contract that includes maintenance and 24/7 support in the rate is buying the absence of that problem, which for some organisations is the entire value proposition.

A quote against a rate card, and the four questions

PolyAI publishes no rate, no minimum commitment, no contract length, no implementation fee, no trial duration and no self-serve tier, and every route on the pricing page leads to a demo request. The single billing statement is that usage is priced per minute with improvements, maintenance and 24/7 support included. That is genuinely informative about the model and tells you nothing about the number, which means no comparison is possible until you have a written quote.

So go in with four numbers to extract, in writing and separately rather than as a blended annual figure. The per-minute rate. The minimum commitment, in both spend and term. The implementation or build fee as its own line. And the renewal mechanics, specifically what happens to the rate when the initial term ends. Ask the minimum commitment early, because it most often decides viability and most often surfaces last, after several calls and a technical review.

Two more questions are worth adding because the page does not answer them and they concern reliability rather than cost. What concurrency is included, and what happens when it is exceeded? And is there a published status page or uptime commitment? No concurrency figures, rate limits or status page were published where we could find them, so reliability cannot be assessed independently and has to be established contractually.

Then benchmark whatever rate arrives. Published August 2026 comparators: Vapi at $0.05 a minute for orchestration with providers separate, ElevenLabs Agents at an effective $0.08 across every tier, Retell AI at an itemised $0.07 to $0.31 including the model and US telephony, and Bland AI bundled at $0.14 with no monthly fee. At 1,500 minutes a month those land between roughly $75 and $465 all-in. A quote well above that band needs to be earning the difference.

Where both of these are the wrong answer

Neither is right for a small business that wants its phone answered. PolyAI is enterprise contact-centre software with procurement timelines measured in weeks or months and no way to hear it working on your own calls quickly. Vapi is explicitly a developer product that hands you components and expects assembly. A clinic, a trades business or an agency is better served by Bland AI at $0.14 a minute bundled with no monthly fee, or Retell AI's itemised band with a visual builder.

Neither is right if you want a managed pipeline without an enterprise contract. Retell AI sits precisely in that gap: pay-as-you-go with no minimums or contracts, $10 in free credits, 20 concurrent calls free, and every component rate published so you can forecast before building. That combination of managed and self-serve is what most mid-market buyers are actually looking for when they end up comparing these two.

Vapi is not right without a developer who will still own it in six months. The $0.05 rate is orchestration only, and the model, transcription, speech synthesis and telephony are four more suppliers to select, integrate and debug. If that person does not exist, the cheaper-looking option is considerably more expensive once you price the unfinished integration that results.

And PolyAI is not right if you cannot absorb the evaluation cost. Weeks of calendar time to reach a number that four competitors publish is the real price of an unpublished rate, and during those weeks the calls are still going unanswered. That is a rational cost for an organisation with procurement machinery and an unaffordable one for a business that needed this working last month.

How to check this yourself, and what we did not test

Vapi's rates came from vapi.ai/pricing on 20 August 2026. PolyAI's pricing page, at poly.ai/pricing on the same date, published one billing sentence and no figures: usage is priced per minute, including proactive performance improvements, maintenance and 24/7 support. No rate, minimum, implementation fee or trial appeared anywhere on it.

That means half this comparison has no numbers in it, and we are not going to invent them. We also did not test call quality, latency or reliability on either platform, and PolyAI publishes no concurrency figures, rate limits or status page that we could find, so its reliability cannot be assessed independently at all. Everything here about PolyAI is what it publishes plus what it declines to.

So the honest process is to build on Vapi's pay-as-you-go plan this week and, in parallel, ask PolyAI for four numbers in writing: the per-minute rate, the minimum commitment in spend and term, the implementation fee as its own line, and the renewal mechanics. By the time the second arrives you will have real calls from the first to benchmark it against.

At a glance

PolyAI vs Vapi decision table, read from each vendor's own pricing page on 20 August 2026

Decision factorPolyAIVapi
Published priceNone$0.05 per minute for orchestration
Billing modelPer minute, rate not publishedPer minute, with providers billed separately or via your own keys
What is includedProactive performance improvements, maintenance and 24/7 supportOrchestration only; model, speech and telephony are yours
Minimum commitmentNot publishedNone on the Build plan
Implementation feeNot publishedNone; you build it
TrialNot publishedPay-as-you-go with minutes included to start
Self-serve signupNone; every route is a demo requestYes
ConcurrencyNot published10 lines on Build, extras $10 per line per month
ComplianceNot publishedHIPAA $2,000/mo, Zero Data Retention $1,000/mo
Who builds itPolyAI scopes and builds the deploymentYou do; a developer is required
Time to a numberWeeks, via a sales processImmediate

What mistakes should you avoid?

  • Comparing an unpublished quote against a published rate as though they were the same kind of number
  • Accepting a blended PolyAI annual figure that hides implementation inside usage
  • Leaving the minimum commitment question until late in the sales process
  • Comparing Vapi's $0.05 against anything without adding the model, speech and telephony
  • Choosing Vapi without a developer who will still own it in six months
  • Entering a months-long evaluation for a workload a published-price platform handles

FAQ

How much does PolyAI cost compared to Vapi?
Unknown. PolyAI publishes no rate, minimum or implementation fee, only that usage is billed per minute with improvements, maintenance and 24/7 support included. Vapi publishes $0.05 a minute for orchestration with providers billed separately. You cannot compare until you have a written PolyAI quote.
Can I try either for free?
Vapi is pay-as-you-go on its Build plan with minutes included to start, so you can build and test today. PolyAI publishes no trial and has no self-serve signup, so evaluating it means entering a sales process rather than hearing it on your own calls in an afternoon.
Which needs a developer?
Vapi, explicitly. It hands you components and expects you to assemble them, and someone has to own the stack afterwards. PolyAI's model includes scoping, build and ongoing support in the contract, which is what an organisation without engineering capacity is actually paying for.
Which is right for a small business?
Neither, in most cases, but for different reasons. PolyAI is enterprise contact centre software with procurement timelines. Vapi is a developer product requiring engineering. A small business wanting its phone answered is usually better served by a bundled platform with a published rate and a visual builder.

Sources & further reading

Done for you

Want this built for your business?

Tell us the workflow. We scope, build, and ship the agent with guardrails and the numbers to prove it worked. The scoping call is free.

Free scoping call. You own the code.

Request a scoping call

Was this page helpful?