Contents
- Fast answer
- Quick facts
- What this covers
- Why it matters
- Where to go next
- Outcomes
- Step by step
- Pick Fin when, pick Breeze when
- Add the platform cost, because it reverses the headline
- Where both of these are the wrong answer
- How to check this yourself, and what we did not test
- At a glance
- Mistakes to avoid
- FAQ
- Related guides
Fast answer
Both bill per resolution and the headline rates differ by half. Fin charges $0.99 for a resolution, procedure handoff or disqualification and $9.99 for a qualification, with a 50 outcomes a month minimum when used with a non-Intercom helpdesk. Breeze charges 50 HubSpot Credits per conversation resolved at $0.010 a credit, so about $0.50. The rates are not the decision. Fin's seats are $29, $85 and $132 per seat a month billed annually on Essential, Advanced and Expert, and it works on top of a non-Intercom helpdesk. Breeze requires Service Hub Professional at $90 per seat a month annually or Enterprise at $150, with one-time onboarding fees of $1,500 and $3,500 respectively, and Agent Hub is not available on the $7 Starter tier. So Breeze is half the price per resolution and roughly triple the price to reach. Which system already holds your customer data settles it.
Facts last verified 2026-08
Quick facts
- Fin per outcome
- $0.99 for a resolution, procedure handoff or disqualification
- Fin qualification
- $9.99 each
- Breeze per resolution
- 50 HubSpot Credits at $0.010 each, about $0.50
- Fin seats
- $29, $85 and $132 per seat per month, billed annually
- Breeze seat requirement
- Service Hub Professional at $90/seat/mo annual, or Enterprise at $150
- Breeze onboarding
- One-time $1,500 on Professional, $3,500 on Enterprise
- Fin minimum
- 50 outcomes a month with a non-Intercom helpdesk
On this page
What this page covers
A comparison visitor should understand the tradeoff, the best-fit scenario, and the next diagnostic tool to confirm the choice.
- 01Quick verdict
- 02Pricing
- 03What counts as billable
- 04Platform cost
- 05Decision table
- 06Where both are wrong
Why does this matter now?
Per-resolution pricing invites a comparison that both vendors are happy for you to make, because it hides the platform underneath. A support team of three resolving 500 conversations a month pays about $495 in Fin outcomes plus seats, or about $250 in Breeze credits plus $270 in Professional seats plus a one-time $1,500. Those totals are much closer than $0.99 against $0.50 suggests, and they move in different directions as you grow.
Internal path
Where to go next from this page
These links are part of the A8gent learning and conversion path. Use them to move from concept, to diagnosis, to workflow build, to course.
What you should be able to do after this
- Compare per-resolution rates like for like
- Add the platform cost behind each rate
- Understand what counts as billable on each
- Pick based on your system of record
How do you do it, step by step?
1. Count genuinely resolvable conversations
Both bill on outcomes, so total ticket volume overstates the cost badly. Take a month of tickets and mark each one answerable from documented knowledge. That count is the number to multiply, and it is usually a fraction of the total.
2. Add the platform cost to each rate
Fin: $0.99 an outcome plus seats at $29, $85 or $132 per seat a month annually. Breeze: about $0.50 a resolution plus Service Hub Professional at $90 per seat a month annually with a one-time $1,500 onboarding fee. Do both sums with your own headcount and volume before comparing the per-resolution figures.
3. Check what counts as billable on each
Fin bills four outcomes: resolution, procedure handoff, disqualification at $0.99, and qualification at $9.99. Breeze bills 50 credits per conversation resolved and 10 credits per Data Agent smart properties run. Fin's handoff and disqualification charges surprise people, and Fin's qualification rate is the single largest budget risk on either platform.
4. Follow the data, not the price
Everything Breeze knows is bounded by HubSpot. Fin works on top of Intercom or another helpdesk. Whichever system already holds your customer history, tickets and documentation will produce better answers, and answer quality moves the total cost more than a fifty cent rate difference does.
Pick Fin when, pick Breeze when
Pick Breeze when HubSpot is already your system of record and you already hold Service Hub Professional or Enterprise seats. Its Customer Agent costs 50 HubSpot Credits per conversation resolved at $0.010 a credit, about $0.50, which is half Fin's rate. In that situation the entry cost is sunk, the agent has native access to the customer history it needs, and the correct action is usually to switch it on and measure rather than run a competitive evaluation.
Pick Fin when your support lives anywhere other than HubSpot. It charges $0.99 per resolution, procedure handoff or disqualification, with a 50 outcomes a month minimum when used with a non-Intercom helpdesk, and it does not require you to own a particular CRM. Twice the unit price buys freedom of platform, and answer quality depends far more on whether the agent can see the right data than on a fifty cent rate difference.
Pick Fin also when you do not yet know how much of your queue an agent can handle. Paying only when an outcome occurs means a disappointing month costs almost nothing, with no stranded capacity and no wasted allowance. That risk transfer is genuinely valuable during an evaluation and for businesses with unpredictable seasonal volume, and it is the strongest argument for outcome pricing over any flat tier.
Pick Breeze also when your volume is predictable and large, because that is when the arithmetic turns. Fin publishes no volume discount, so 5,000 outcomes cost five times what 1,000 cost. Breeze's included allowances are 500 credits on Starter, 3,000 on Professional and 5,000 on Enterprise per seat month, which at 50 credits a resolution is about 10, 60 and 100 resolutions, with top-ups at $0.010 a credit.
Add the platform cost, because it reverses the headline
The rates are not the decision and comparing them alone produces the wrong answer. Fin's seats are billed independently of usage at $29 per seat a month on Essential, $85 on Advanced and $132 on Expert, all annually, plus $29 per helpdesk seat. Fin Copilot is $35 per user a month. Breeze requires Service Hub Professional at $90 per seat a month annually or Enterprise at $150, with one-time onboarding fees of $1,500 and $3,500 respectively, and Agent Hub is not available on the $7 Starter tier.
Work a three-person support team resolving 500 conversations a month. On Fin Essential: seats are $29 times three times twelve, so $1,044 a year, plus 500 outcomes a month at $0.99, which is $5,940 a year, for roughly $6,984 in year one. On Breeze Professional: seats are $90 times three times twelve, so $3,240, plus a one-time $1,500, plus 320 extra resolutions a month beyond the 180 included at $0.010 a credit, which is about $1,920 a year, for roughly $6,660.
Those totals are within about five percent of each other, which is the opposite of what $0.99 against $0.50 suggests. And they move in different directions as you grow: Fin's bill scales linearly with outcomes forever, while Breeze's scales with top-up credits on top of a fixed seat base. Run the sum with your own headcount and volume, because the crossover sits in a different place for every team.
Then check what counts as billable, because the definitions differ and both surprise people. Fin bills four events: resolution, procedure handoff and disqualification at $0.99, and qualification at $9.99. A procedure handoff bills even though a human then does the work. Breeze bills 50 credits per conversation resolved and 10 credits per Data Agent smart properties run. Fin's qualification rate at ten times a resolution is the single largest budget risk on either platform, and it is easy to configure into unintentionally.
Where both of these are the wrong answer
Neither is right if you would have to buy the platform underneath to get the agent. Buying HubSpot to save fifty cents a resolution has never repaid, and the comparison in that case is not Breeze against Fin, it is HubSpot against your current stack. If you are not already committed to either ecosystem, Chatbase publishes standalone tiers from $40 a month for 700 message credits up to $500 for 15,000 with no seat requirement and no onboarding fee.
Neither is right below roughly 200 resolvable tickets a month. At that volume a flat-rate chatbot costs a fraction of either and the quality gap will not repay the difference. The right response to a small queue is a simpler tool rather than a cheaper per-resolution rate, and recognising that saves both the money and the implementation effort the better product would have demanded.
Neither is right if the real work is triage rather than conversation. A large share of support automation is reading a ticket, classifying it, routing it and drafting a reply for a human, which is a workflow rather than a dialogue. n8n Cloud starts at EUR 20 a month billed annually for 2,500 executions with free self-hosting, and metering by execution means a complex routing rule costs the same as a simple one.
And neither is right if the data needed to answer your questions is not in the system the agent can see. Breeze knows only what lives in HubSpot; Fin knows what its helpdesk and knowledge sources contain. Write down ten real customer questions from last month and check whether the answering data actually exists in that system. If several fail, the constraint is your data rather than your vendor, and no per-resolution rate fixes it.
How to check this yourself, and what we did not test
All figures on this page were read from each vendor's own pricing page on 20 August 2026 and the source URLs are listed below. Fin's outcome rates came from fin.ai/pricing, Intercom's seat tiers from intercom.com/pricing, and HubSpot's seat tiers, credit rate and onboarding fees from hubspot.com/pricing/service. The three-person worked example on this page is arithmetic from those published figures, not a case study, and it assumes 500 resolvable conversations a month.
We did not measure resolution quality on either platform, which is the variable that matters most and the one we have no data on. A platform that resolves 60 percent of your queue at $0.99 is cheaper per outcome than one resolving 30 percent at $0.50, and nothing on any pricing page tells you which you will get. We also did not test either agent against real ticket mixes.
The test that decides this is the ten-question check. Write down ten real customer questions from last month and ask whether the data needed to answer each correctly lives in the system the agent can see: HubSpot for Breeze, your helpdesk and knowledge sources for Fin. If several fail, the constraint is your data rather than your vendor, and no per-resolution rate fixes it.
At a glance
Intercom Fin vs HubSpot Breeze decision table, read from each vendor's own pricing page on 20 August 2026
| Decision factor | Intercom Fin | HubSpot Breeze |
|---|---|---|
| Per resolution | $0.99 | 50 credits at $0.010 each, about $0.50 |
| Other billable outcomes | Procedure handoff and disqualification at $0.99; qualification at $9.99 | Data Agent at 10 credits per smart properties run, about $0.10 |
| Seat requirement | Essential $29, Advanced $85, Expert $132 per seat/mo annual | Service Hub Professional $90/seat/mo annual or Enterprise $150 |
| Cheapest qualifying tier | Essential at $29 per seat/mo annual | Professional at $90/seat/mo annual; Agent Hub is not on Starter |
| One-time fees | None published | $1,500 onboarding on Professional; $3,500 on Enterprise |
| Included allowance | None; every outcome bills | 500 credits on Starter, 3,000 on Professional, 5,000 on Enterprise |
| Allowance in resolutions | Not applicable | About 10, 60 and 100 respectively |
| Rollover | Not applicable | None; credits reset monthly |
| Volume discount | None published | Not published beyond the tier allowances |
| Works with other helpdesks | Yes, with a 50 outcomes a month minimum | No; bounded by HubSpot |
| Voice | Fin Voice is custom priced and not published | Not published |
What mistakes should you avoid?
- Comparing $0.99 against $0.50 without adding seats and onboarding fees
- Assuming Breeze is available on Service Hub Starter, when Agent Hub needs Professional
- Missing that Fin bills procedure handoffs and disqualifications, not just resolutions
- Leaving a Fin qualification workflow enabled at $9.99 each
- Reading Breeze's 3,000 included credits as generous when it is about 60 resolutions
- Buying a CRM or a helpdesk to access an agent, which rarely repays
FAQ
- Which is cheaper per resolution?
- Breeze, at about $0.50 against Fin's $0.99, calculated from 50 HubSpot Credits at $0.010 each. But Breeze requires Service Hub Professional at $90 per seat a month annually plus a one-time $1,500 onboarding fee, while Fin's seats start at $29 per seat a month annually. The totals are much closer than the rates.
- What counts as billable on each?
- Fin bills resolutions, procedure handoffs and disqualifications at $0.99, and qualifications at $9.99. Breeze bills 50 credits per conversation resolved and 10 credits per Data Agent smart properties run. Fin's handoff charge is billable even though a human then does the work.
- Do I need HubSpot to use Breeze?
- Yes, and specifically Service Hub Professional at $90 per seat a month annually or Enterprise at $150. Agent Hub is not available on the $7 Starter tier. Fin, by contrast, carries a 50 outcomes a month minimum when used with a non-Intercom helpdesk but does not require you to own a specific CRM.
- How do I choose?
- By where your customer data already lives. If HubSpot is your system of record and you hold Professional seats, Breeze is close to free money at half Fin's rate. If your support lives in Intercom or another helpdesk, Fin will answer more questions correctly, and correct answers matter more than a fifty cent difference.
Sources & further reading
Done for you
Want this built for your business?
Tell us the workflow. We scope, build, and ship the agent with guardrails and the numbers to prove it worked. The scoping call is free.
Free scoping call. You own the code.
Was this page helpful?

