Contents
Fast answer
The decision is per-execution against per-task billing, and for a small business it turns on volume multiplied by steps. Zapier bills each successful action as a task, with published pricing as of August 2026 starting at $29.99 a month for Professional with 750 tasks, on a slider up to $5,099 a month for two million tasks, and Team from $103.50 a month with 2,000 tasks and 25 seats. n8n meters full workflow executions regardless of step count, at 20 euros a month for Starter with 2,500 executions, 50 euros for Pro with 10,000 and 667 euros for Business with 40,000 plus self-hosting, with a free community edition that has no execution limit at all. A six-step automation running 2,000 times a month is roughly 10,000 billable tasks on Zapier and 2,000 executions on n8n. That is the whole story. Zapier buys you the largest connector catalogue in the category and the shortest path from idea to working automation. n8n buys you a bill that does not grow with the number of steps you draw - if you have someone technical to run it.
Facts last verified 2026-08
Quick facts
- Zapier metering
- Per task - each successful action; triggers, filters and formatters do not count
- Zapier pricing
- Professional from $29.99/mo for 750 tasks; Team from $103.50/mo with 25 seats (as of Aug 2026)
- n8n metering
- Full workflow execution regardless of step count; unlimited workflows, steps and users
- n8n pricing
- Starter €20/mo for 2,500 executions; Pro €50/mo for 10,000; Business €667/mo for 40,000
- n8n self-hosted
- Community edition free, no execution limit; typically $5-$20/mo hosting
- Worked example
- A six-step workflow run 2,000 times = ~10,000 Zapier tasks or 2,000 n8n executions
- Connector catalogue
- Zapier is the largest in the category by a wide margin
- Migration
- No automatic import either way - every workflow is a manual rebuild
On this page
What this page covers
A comparison visitor should understand the tradeoff, the best-fit scenario, and the next diagnostic tool to confirm the choice.
- 01Quick verdict
- 02Billing model
- 03Cost at volume
- 04Maintenance
- 05Decision table
- 06Where both are wrong
Why does this matter now?
Most small businesses pick an automation platform for their first workflow and then live with it for years. The choice looks cheap at one workflow and expensive at ten, because per-task pricing multiplies by every step you add while per-execution pricing does not. Discovering that after building twenty automations means rebuilding all of them by hand, since nothing imports between the two. The right time to think about the meter is before the second workflow, not after the tenth.
Internal path
Where to go next from this page
These links are part of the A8gent learning and conversion path. Use them to move from concept, to diagnosis, to workflow build, to course.
What you should be able to do after this
- Model the bill at your real volume
- Understand tasks versus executions
- Know when switching is worth it
- Match the tool to your team
How do you do it, step by step?
1. Count runs and steps separately
Write down how many times each workflow runs a month and how many actions it performs per run. Multiply for Zapier's task count; use the run count alone for n8n's execution count. A six-step automation at 2,000 runs a month is 10,000 Zapier tasks and 2,000 n8n executions. That single calculation resolves most of this comparison before you look at a feature list.
2. Know what does and does not count as a task
On Zapier a task is each successful action a Zap completes. Triggers, polling and built-in steps like Filter and Formatter do not count, and some AI actions consume multiple tasks. That matters: a filter-heavy Zap is cheaper than its step count suggests, and an AI-heavy one is more expensive. Model your specific workflow rather than assuming steps equal tasks.
3. Price both at real volume, not pilot volume
As of August 2026 Zapier Professional starts at $29.99 a month for 750 tasks and runs on a slider to $5,099 for two million; Team starts at $103.50 with 2,000 tasks and 25 seats, and annual billing is advertised at 33 percent off. n8n cloud is 20 euros for 2,500 executions, 50 for 10,000, 667 for 40,000. Put your real monthly figure into both ladders.
4. Test the connectors you actually depend on
Zapier's connector catalogue is the largest in the category by a wide margin, which means the obscure app you depend on is probably supported. That is the strongest reason to pay its premium. n8n covers the mainstream well and can call arbitrary APIs when a node is missing, but that is engineering work rather than a checkbox. Confirm the exact trigger and the exact fields before committing.
5. Decide who owns a broken workflow
Zapier is the easiest platform in the category for a non-technical owner to build and fix. n8n rewards someone comfortable reading a JSON payload and unbothered by a container upgrade if self-hosted. Without that person the self-hosted saving becomes downtime nobody can resolve. The best platform is the one your team can debug on a bad Monday, not the one with the better price per unit.
6. Consider self-hosted n8n only with a real owner
n8n's community edition is free to self-host with no execution limit, which is the option most technical small businesses should price first - typically $5 to $20 a month on a small VPS. That is genuinely the cheapest serious automation available. It is also a server you now run, patch and back up, and that responsibility does not go away when the person who set it up gets busy.
7. Switch on a threshold, one workflow at a time
Set a monthly bill above which you re-run this comparison rather than switching on frustration. When you do move, migrate one workflow at a time and run both in parallel during the cutover, because there is no automatic import between them. Document each workflow's trigger, logic and credentials as you go, so the knowledge is not trapped in one person's head.
Pick n8n when, pick Zapier when
Pick Zapier when speed to a working automation matters more than the meter, and when nobody in the business wants to own a server. It has the largest connector catalogue in the category by a wide margin, so the obscure app you depend on is probably supported, and it is the easiest platform here for a non-technical owner to build in and fix. Published pricing as of August 2026 starts at $29.99 a month for Professional with 750 tasks, or $19.99 billed annually, with Team from $103.50 including 25 seats.
Pick n8n when volume multiplied by steps is climbing. It meters a full workflow execution regardless of how many steps it contains, and every plan includes unlimited workflows, steps and users. A six-step automation running 2,000 times a month is roughly 10,000 billable Zapier tasks and 2,000 n8n executions - and 2,500 executions is the 20-euro Starter plan. That structural difference is worth more to a growing automation programme than any feature on either comparison page.
Pick self-hosted n8n only if you have a real owner for it. The community edition is free with no execution limit and typically costs $5 to $20 a month on a small VPS, which is genuinely the cheapest serious automation available. It also rewards someone comfortable reading a JSON payload and unbothered by a container upgrade. Without that person the saving turns into downtime nobody can fix, and that is a worse outcome than a Zapier bill.
Pick Zapier when the workflows are linear and few. If you run three automations of two or three steps each, the task count stays low, the connector catalogue does the work, and the time you would spend learning n8n is worth more than the difference. The meter only becomes the story once workflows get step-heavy or volume gets real.
The arithmetic that settles it
Write down two numbers: how many times each workflow runs a month, and how many actions it performs per run. Zapier bills the product of those; n8n bills the first one alone. That is the entire comparison in one sentence, and everything else is a refinement of it.
The refinement worth knowing on the Zapier side is what does not count. A task is each successful action a Zap completes - triggers, polling and built-in steps like Filter and Formatter do not count, and some AI actions consume multiple tasks. So a filter-heavy Zap is cheaper than its step count suggests and an AI-heavy one is more expensive. Model your actual workflow rather than assuming steps equal tasks.
The refinement on the n8n side is concurrency rather than volume. Starter includes 5 concurrent runs at 20 euros a month, Pro includes 20 at 50 euros, and Business includes more still alongside the self-hosting entitlement, as of August 2026. If several workflows fire at once - a busy morning, a campaign, a batch import - concurrency is what constrains you rather than the execution allowance.
One thing the arithmetic does not capture: there is no automatic import between these platforms, so every migration is a manual rebuild. That is why it is worth thinking about the meter before the second workflow rather than after the tenth. Set a monthly bill threshold in advance that triggers a re-run of this comparison, then migrate one workflow at a time with both running in parallel through the cutover.
Where both of these are the wrong answer
Both are wrong if you have not written the workflow down. Diagram the trigger, each step, the data that moves between steps and every branch before choosing anything. Skipping this is the main reason teams pick the wrong platform and rebuild later, and it is free to do. The diagram usually tells you whether you need linear simplicity or low-code depth without any pricing being involved.
Both are wrong when the real requirement is Microsoft-native automation with unattended RPA against legacy desktop software. Neither of these drives an old Windows application that has no API. If part of your process is that, a platform built for it is the answer and this comparison is beside the point.
And both are wrong without error handling, which is the thing that separates an automation that helps from one that quietly stops. Add retries, failure notifications and a human approval step for any AI action that writes to real systems, on either platform. An automation only helps while it keeps running, and the difference between the two platforms matters far less than whether anyone finds out when one breaks.
At a glance
n8n vs Zapier for small business, published pricing as of August 2026
| Decision factor | n8n | Zapier |
|---|---|---|
| What is metered | Full workflow executions, step count irrelevant | Each successful action as a task |
| Entry price | €20/mo Starter for 2,500 executions | $29.99/mo Professional for 750 tasks, $19.99 billed annually |
| Six-step workflow, 2,000 runs/mo | 2,000 executions - inside the €20 Starter plan | Roughly 10,000 tasks - several steps up the slider |
| Seats | Unlimited users on every plan | 1 seat on Professional; 25 on Team from $103.50/mo |
| Self-hosting | Community edition free, no execution limit | Not available |
| Connector breadth | Good on mainstream apps, arbitrary API calls fill gaps | Largest catalogue in the category |
| Technical bar | Expects comfort with expressions and JSON | Easiest in the category for a non-technical owner |
| Concurrency | 5 concurrent on Starter, 20 on Pro | Not the published constraint - tasks are |
| Best fit | Step-heavy or high-volume work with a technical owner | Few, simple workflows and no technical owner |
What mistakes should you avoid?
- Comparing entry prices instead of modelling runs multiplied by steps at real volume
- Assuming every step is a billable Zapier task when filters, formatters and triggers are not
- Choosing self-hosted n8n with nobody who will own upgrades, backups and a broken container
- Assuming a connector exists on n8n without checking the exact trigger and fields
- Staying on Zapier past the point where the bill has clearly outgrown the convenience
- Migrating every workflow at once with no parallel running and no documentation
- Skipping error alerting, so a stopped workflow is discovered by a customer rather than a dashboard
FAQ
- Which is cheaper for a small business?
- It depends on steps per run. A six-step automation running 2,000 times a month is roughly 10,000 Zapier tasks and 2,000 n8n executions, and those land on very different points of the two ladders. Simple two-step automations at low volume can be cheapest on Zapier once you count your own time. Step-heavy or high-volume work is consistently cheaper on n8n.
- Is self-hosted n8n really free?
- The software is - the community edition is free to self-host with no execution limit. Your actual cost is a small VPS, typically $5 to $20 a month, plus the time to patch, upgrade, monitor and back it up. That is a fine trade for someone technical and a poor one for a business without that person, because the saving evaporates the first time it breaks and nobody can fix it.
- Which is easier for a non-technical owner?
- Zapier, clearly, and that is a legitimate reason to choose it. It is the fastest way to get a simple automation live and the easiest to maintain without technical help. n8n expects comfort with expressions, JSON payloads and, if self-hosted, a server. Match the platform to who will actually own failures and update credentials, not to the longer feature list.
- At what point should I switch from Zapier to n8n?
- When your task count is climbing faster than the value you get from the connector catalogue - typically once workflows are step-heavy or running at real volume. The honest test is to price the same month's work on both ladders. If the gap is large and you have someone technical, switching pays; if the gap is small, the migration effort is not worth it.
- Can I move my Zaps to n8n automatically?
- No. There is no automatic import between them, so every workflow is a manual rebuild on the new platform. That is the main reason to think about the meter early. Reduce the pain by documenting each workflow's trigger, steps, logic and credentials, migrating one at a time, and running both in parallel through the cutover.
- Can Zapier handle AI agent workflows?
- It can handle simple ones that draft, summarise, classify, notify or update common systems with clear approval rules. Note that some AI actions consume multiple tasks, so AI-heavy Zaps cost more than their step count suggests. Once a workflow needs heavy branching, loops or serious data transformation, n8n's low-code depth fits better and its execution billing stops punishing complexity.
Sources & further reading
Done for you
Want this built for your business?
Tell us the workflow. We scope, build, and ship the agent with guardrails and the numbers to prove it worked. The scoping call is free.
Free scoping call. You own the code.
Was this page helpful?

